Riddell Speed Face Masks
Face mask fits Youth and Adult Speed, Speed Icon, and Speed Classic.
Also Victor and Victor-I sizes S/M and L/XL. Does not fir XXS/XS.
Additional information
| Weight | 12 lbs |
|---|---|
| Dimensions | 8 × 5 × 10 in |
| Style | S2BD, S2EGII, S2BDC |
| Color | Black, White, Navy Blue, Royal Blue, Scarlet Red, Gold, Grey, Forest Green, Maroon |
You may also like…
S2BDC
Position: LB, TE, DL, DE, OL
Material: Carbon Steel
Size: Sm – XL (Adult or Youth)
NO HELMET CAN PREVENT SERIOUS HEAD OR NECK INJURIES A PLAYER MIGHT RECEIVE WHILE PARTICIPATING IN FOOTBALL.
Do not use this helmet to butt, ram or spear an opposing player. This is in violation of the football rules and such use can result in severe head or neck injuries, paralysis or death to you and possible injury to your opponent. Contact in football may result in CONCUSSION-BRAIN INJURY which no helmet can prevent. Symptoms include: loss of consciousness or memory, dizziness, headache, nausea or confusion. If you have symptoms, immediately stop playing and report them to your coach, trainer and parents. Do not return to a game or practice until all symptoms are gone and you have received medical clearance. Ignoring this warning may lead to another and more serious or fatal brain injury.
1) Helmet must be properly fitted. See instructions.
2) Do not modify, change or alter helmet in any way.
3) Do not remove labels on helmet. See terms of limited warranty.
4) Helmet protection will be reduced seriously by some applied common substances without damage being visible to the user. It is recommended that user employ only factory authorized paints, cleaners, waxes, adhesives, guards and attachments as instructed.
The warranty on helmet shells is five (5) years for polycarbonate (Varsity) helmets and three (3) years for ABS (Youth) helmets from the original date of purchase, provided there has been normal use and proper maintenance. It is recommended that your helmet be reconditioned every year by a Riddell Factory Authorized Reconditioner. Proper maintenance requires reconditioning of your helmet at least every two (2) years by NOCSAE Licensed Reconditioner using only new factory replacement liners in the reconditioning process. Evidence of any of the following conditions will operate to void this warranty:
1) Failure to have the helmet reconditioned at least every two (2) years by a NOCSAE Licensed Reconditioner.
2) Installation of non-OEM parts whenever a liner replacement is necessary.
3) Where shells have been damaged by a chemical reaction from the use of incompatible materials such as:
a. Attachment of a guard, face mask or component of another manufacturer or mismated material.
b. Use of cleaners, waxes or paints of another manufacturer or failure to follow recommended cleaning an painting instructions.
REMOVING the COMFORT FIT OVERLINER
• Detach Crown pad from Velcro on interior shell
• Detach Velcro fasteners at lower rear of helmet, between lower Back liner
pad and interior shell
• Gently guide Side liner pads from right and left sleeves of Overliner
REPLACING the COMFORT FIT OVERLINER
• Guide Side liner pads into right and left sleeves of Overliner
• Attach two rear flaps of Overliner to Velcro fasteners located on backside of lower Back liner pad, behind the Riddell nameplate
• Bring Side liner pads into place above ear holes
• Secure the left and right ends of Side liner against Front liner pad
• Attach two front flaps of Overliner to Velcro located on front-backside of Crown pad
• Slide flaps between Crown pad and interior shell and connect with Velcro
• Ensure Overliner fits snug over BACK/NECK/SIDE liner and Crown pad
REMOVING the BACK/NECK/SIDE LINER
• Gently remove valve cap from rear of exterior shell
• Invert helmet and gently wedge fingers under Back pad
• Place fingers around circular valve retainer
• Ease valve from interior shell
• Slide the Riddell nameplate from rear of helmet
• Pull liner from helmet
REPLACING the BACK/NECK/SIDE LINER
• Slide the Riddell nameplate over bottom-rear of helmet
• Locate valve through the hole in rear of exterior shell
• Center valve and press it into the hole
• Secure valve with exterior valve cap
• Bring Side liner pads into place above ear holes
• Ensure Side liner’s left and right ends fit snug against Front pad
REMOVING S-PADS (FACE PADS)
• Gently dislodge shell plugs or valve retainers near the ear holes
• Slide fingers between Face pad and interior shell, locate shell plugs
• Ease plugs from interior shell
• Pull pad away from Velcro
– Be careful to not rip the pad material
REPLACING S-PADS (FACE PADS)
• Press shell plugs or valve retainers into holes near ear holes
• Connect pad to Velcro on interior shell
REMOVING the CROWN PAD
• Gently remove valve cap from top of exterior shell
• Invert helmet and gently wedge fingers between Crown pad and interior shell
• Ease the valve from interior shell
• Ease shell plug from interior shell
• Pull Crown pad from helmet
REPLACING the CROWN PAD
• Invert helmet
• Press the shell plug into top of interior shell
• Locate valve through the second hole in the top of exterior shell
• Center valve and press it into the hole until flush with exterior shell
• Secure valve with exterior valve cap
REMOVING the FRONT PAD
• Grip Front pad from its top or sides
• Gently pull Front pad from Velcro fastener
– If necessary, pull ends of Side pads away from interior shell
• If Front Pad is inside a pocket:
– Pull pocket away from Velcro fastener
– Slide Front Pad out of pocket
REPLACING the FRONT PAD
• Connect Front Pad to Velcro on interior shell
• Press pad into place
– If necessary, pull ends of Side pads away from interior shell
– Ensure Front pad fits snug between ends of Side liner
• If Front pad goes inside a pocket:
– Slide Front pad into pocket
• Attach pocket to Velcro fastener